Newsletter No.32

April 2019

  • LinkedIn Social Icône
  • YouTube Social  Icon
  • Facebook Social Icon

Rincent ND Applications

> Rincent ND Applications, a specialist in non-destructive testing, and Rincent Alpes, have carried out non-destructive dynamic tests on existing anchoring rods on the tie beam of a cabin cableway support tower in the Mont Blanc massif...



> A recent intervention on a site in southern Brazil shows the consistency of the values of tensile forces obtained from the vibration analysis tests with the values deduced from the calculation of earth pressure on the retaining wall...


> The Rincent Nord-Pas-de-Calais agency associated with Rincent ND Applications   have   performed   a   diagnosis   of   the   quality  of  the fastenings of 42 facade cladding panels of a building...


Rincent Air

> Two measurement campaigns were carried out to characterize the initial state of the air quality in the environment of the Eiffel Tower renovation project. Rincent AIR installed sensors of:...



> The common duct for pressure tight Boiler called  3Cep, is   a   vertical   and collective combustion products   evacuation system allowing the connection of several individual condensing  boilers . to  a  sealed combustion circuit...



> The Rincent Nord-Pas-de-Calais agency intervened   on  a  parking   project   in Colmar. It  was  to perform a tensile test on piles whose function is to take up the pushing forces induced by the water during the rise of the water table...



> The NF EN 16907-4 standard deals with the soil improvement using lime and / or hydraulic binders. This part 4 of the standard has more than 100 pages and develops procedures related to the different types of materials defined in part 2 of the same standard. The Rincent Ile de France Nord...


Rincent Airports

Rincent Airports has performed deflection measurements with a FWD (Falling Weight Deflectometer), on highway A570 on a 6.5km long section, (PACA Region). The 280 measurements were carried out at night using a FWD type deflectometer...


Congo DRC

> Rincent ND Technologies has completed a training of technicians and engineers of the Congolese Agency of Great Works in Kinshasa. This training is related to the handling of materials:...


Congo DRC

> Part   of   the   training   was   on   the   retro- calculation which makes it possible to convert the measured deflections into elastic modulus for each of the layers composing the roadway...



> The ICA - ITECH - RINCENT BTP SERVICES - ROAD & D group has been working since mid-2018 on the development of a road reinforcement guide for AGEROUTE in Senegal...



The attached photos show a deep foundation element of 250mm in diameter at the time of the first tests and the same foundation after excavation...



Rincent Research Expertise has been working in Myanmar to participate in the development of a methodology for reinforcing a raft by injection...



The Government of Uganda through a national water-specific company, is building  a  water  treatment  plant  in Katosi  and storage facilities in Nsumba...

Rincent BTP Services SAS

4 bis rue du Bois Briard

91080 Courcouronnes

Tél. +33 1 60 87 21 25

© 2020 Rincent Laboratoires